Looking to go from your standard Brembo 4 piston or base model caliper to a powerhouse 6 piston setup without converting to costly 2 piece rotors? This is the ticket! Fits over your factory 11" front rotors! Better wheel clearance than factory AND Brembo calipers. Utilizes a Wilwood 6 piston caliper that is 3 lbs lighter than the factory caliper per corner (including brake pads). Despite more pistons this is still lighter than the factory Brembo caliper.

Weight
Utilizes a Wilwood 6 piston caliper that is 3 lbs lighter than the factory caliper per corner (including brake pads). Despite more pistons this is still lighter than the factory Brembo caliper.

Balance
Not all fancy brake calipers are the same, piston size, pad size, and more all affect performance and longevity. Our caliper choice was made with great care to retain the superb braking balance.

Pads
Upgrading your ND with our caliper package gives you access to the wide and familiar selection of performance brake pads that we have decades of experience with! Replacement pad costs for these calipers are also far more affordable than for the factory calipers. Kit includes BP20 pads which are great for street/light performance use and match very well with factory pads in the rear. If you would like to swap to a different pad for more aggressive use, just shoot us an email!

Weight

Kit includes:

• Dynapro 6 piston calipers
• Mounting Brackets
• Stainless Steel brake lines
• All mounting hardware
• BP20 Street Performance Brake pads
• Wilwood high-temp brake fluid

Fitment Notes
Better wheel clearance than the factory Brembos! YES you can fit a 15" wheel at the FRONT over this kit (which you cannot do with stock brakes). Fits almost all aftermarket 16" and 17" wheels that we sell here. Fits factory 17" BBS wheels with no spacer (those are made to clear multi piston optional Brembo calipers) and fits standard factory 17x7 wheels with optional slim 3mm spacer. MOST aftermarket wheels clear this caliper and do not need the spacer. However, Konig Ampliform 17x8 requires 3mm spacer. For standard factory 17x7" and 16x7" wheels, you need the spacer.