MeisterR ZetaCRD Coilovers

(2 reviews) Write a Review
$1,425.00 $1,245.00
(You save $180.00)

We're very proud to host the MeisterR product here at Fab9Tuning. ZetaCRD coilovers are designed for fast road and occasional track day use. Engineered to reduce body roll, provide compliant handling, without sacrificing ride comfort. Damping and ride height adjustable mean the ZetaCRD will provide full control over the vehicle suspension setting for the road or on the track.

ZETA (ζ) is the symbol for “damping ratio”, a measurement describing how oscillations in a system die down after a disturbance. The ability to control oscillations is the most important function of a suspension system and it is the concept that the ZetaCRD coilovers are build upon.

Each application includes aluminum top mounts and extended rear to provide proper travel lengths where needed.


Spring Rate Specifications:

NA/NB (89-05):

  • Front 6kg/mm 
  • Rear 5kg/mm

NC (06-15): 

  • Front 6kg/mm 
  • Rear 5kg/mm

ND (15+): 

  • Front 7kg/mm 
  • Rear 4.5kg/mm



2 Reviews

  • 5
    MeisterR ZetaCRD Coilovers

    Posted by Alex U. on Dec 3rd 2018

    I own a 2005 Mazdaspeed Miata. I took out the stock Bilstein shocks and exchanged them with the Koni Yellow Adjustables. I used them in combination with the MSM springs rated at F: 215 lbs./in., R: 158 lbs./in. It worked great for daily driving and I clocked in over 220,000 miles on the chassis.

    I needed to refresh the suspension and heard of this great new coilover product from Meisterr from my miata buddies.

    The coilovers came very nicely double fibreboard corrugated packaging, completely assembled, and after checking the lengths with a measuring caliper in equal lengths.

    It took about 3-1/2 hours to install and I am very happy with these coilovers. After the car settled at F: 12.2" / R: 12.5", two weeks later I had the car professionally corner balanced and F/R alignment as follows;
    F: 1.6 degrees neg. camber, 1/16" toe-in, 5.0 degrees caster
    R: 1.8 degrees neg. camber, 3/32 toe-in

    The car drives great! Its set for my daily driving and weekend canyon runs. Thank you!

  • 5
    Bang for the buck

    Posted by bill phan on Jun 19th 2018

    Best coilovers for the ND for the price. Anything more expensive would be unnecessary for a daily driver. The customer service from Meisterr has been great as well.