The highest performing direct replacement pump available:
DeatschWerks redesigned the DW300 to offer greater flow with no significant increase in current draw. The new DW300 pump flows 26% more at its peak and 20% more on average. The low amperage draw minimizes pump temperatures, maximizes pump life and reduces stress on OE wiring.
The increases in flow were specifically engineered for high pressures (60-90psi), where forced induction applications need it the most. Conversely, fuel flow has been limited at low pressures (30-50psi) to minimize heat generation in return fuel systems. This dual zone approach results in a flatter flow curve, which maximizes both performance and reliability for supercharged or turbocharged applications.
- Flows 340 liters per hour (90 gallons per hour)
- In-tank application specific fitment
- Ethanol compatible
- 3-year no-fault warranty
- Quiet and reliable turbine impeller
- Includes Miata specific installation kit
1 Review
-
Install Kit
There is not an install kit in the box... no screen, clamps, connector, or any of what is shown in the pictures and description. There are only two O rings. So far the only Fab9 response I have said there is no kit for this pump, and there is no aftermarket pump that has a kit. This is entirely different than what shows on this site.
Response from Fab9: The pump includes and installation kit, yes, it's only two O-Rings. Everything you need. I'm sorry it didn't match what you may have seen in older vehicles but the NC utilizes a cartage style fuel pump housing. Nothing more is needed. That's like asking for hose clamps when there are no hoses involved in the installation. The description does not state any of these are included as they would be useless in this application.
